- GASTEC手動氣體采樣...
- GASTEC氣體檢測管
- GASTEC長時間（時量...
- GASTEC電泵用氣體檢...
- 日本光明（北川式）氣體檢...
- 日本KOMYOKK手動氣...
- 自動氣體采樣器
- 突發性有毒有害氣體檢測箱
- 惡臭氣體快速檢測箱
- 煙道氣體快速檢測箱
- 快速水質檢測管
- 快速水質、地質污染**檢...
- 便攜式氣體報警器
- 恩尼克思?xì)怏w檢測報警器
- 壓縮空氣有害不純物檢測套...
- 標準氣體發生裝置
- 室內空氣質量檢測儀
- 特殊用檢測管
- 國產氣體檢測管及采樣器
- 便攜式氣味傳感器
- 氣體采樣袋
- 配件及耗材
- 氣體傳感器
產品詳情
簡單介紹：
一氧化碳CO氣體檢知管106B
一氧化碳CO氣體檢知管106B，一氧化碳CO氣體檢知管106B CARBON MONOXIDE 10-1000ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史
詳情介紹：
一氧化碳CO氣體檢知管106B
一氧化碳CO氣體檢知管106B，一氧化碳CO氣體檢知管106B CARBON MONOXIDE 10-1000ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史 。目前是世界上*大的檢測管生產廠家，也是日本**家通過美國SEI的認證，歐盟的認證的檢測管廠家。公司不僅有ISO9001:2000的認證，還獲得了環境管理的ISO14001的認證。北川式手動氣體采集器AP-20 備有采氣完成指示計 , 可以清楚的判明采氣是否完成 . • 有專門截留玻璃的截留槽 , 以防止檢測管割尖時玻璃片飛濺 . • 有采氣容積為 50 毫升和 100 毫升的兩段式制動卡 . • 采氣器極為小巧 , 并有便于攜帶的皮具包 。
Tube No.106B
1. PERFORMANCE
1) Measuring range ：10-1,000 ppm
This tube is calibrated based on the sampling time not related with number
of pump strokes.
2) Sampling time ：0.5-5.0 minutes
3) Detectable limit ：10 ppm(5.0 minutes)
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Temperature compensation ：Necessary(See "TEMPERATURE CORRECTION TABLE)
7) Reading ：Colour intensity method using colour standard chart shown in below
8) Colour change ：Pale yellow→Green to Blue
2. RELATIVE STANDARD DEVIATION
RSD-low： RSD-mid.： RSD-high：
3. CHEMICAL REACTION
Molybdate is reduced and molybdeum blue is produced.
CO＋PdSO4＋(NH4)MoO4→Mo3O8
4. CALIBRATION OF THE TUBE
STANDARD GAS CYLINDER METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
REAGENT
(PaleYellow)
REAGENT
(PaleYellow)
First Section Second Section
106B
CARBON MONOXIDE
Substance Interference ppm Coexistence
Nitrogen dioxide 1 Lower readings are given.
Hydrogen sulphide Black stain is produced. 1,000 Black stain is produced and higher
readings are given.
Hydrogen(over 40℃) Similar stain is produced 10％ Whole reagent is discoloured to
Blue and higher readings are given.
6. NOTE
1)In case of determining CO concentration,it is necessary to take a waiting time related to the sampling time
andambient tenperature.After thewaiting time,compare the second section of reagent with the colour standard
chart.
2)In case of spontaneous conbustion of coal mines,Ethylene and CO are produced.The first section is partially
stained to deep blue from the top of the section according tc Ethylene concentration .Whole areas of first
and second sectionsare equallystained to greenishblue according to CO concentration.The first sectionis
available to detect less 5 ppm of Ethylene.
TEMPERATURE CORRECTION TABLE
Temperature 0℃ 5℃ 10℃ 15℃ 20℃ 25℃ 30℃ 35℃ 40℃
(32°F) (41°F) (50°F) (59°F) (68°F) (77°F) (86°F) (96°F) (104°F)
Waiting time(minute)
Sampling time up to 1 minutes 5 5 3 2 2 1 1 1 1
Sampling time of 2 minutes 7 7 4 3 3 2 1 1 1
Chart Readings(ppm)
100 400 250 150 100 70 50 40 30 20
200 800 500 300 200 140 100 70 50 40
300 1,200 800 450 300 200 150 100 80 60
600 2,300 1,500 900 600 400 300 200 150 120
1,000 3,900 2,500 1,500 1,000 700 500 300 250 200
Color Standards for CARBON MONOXIDE
Concentration
(P.P.M) 0 100 200 300 600 1000
Feeding Time ：30 sec.
Waiting Time ：2 min.
Temperature ：15℃
1. PERFORMANCE
1) Measuring range ：10-1,000 ppm
This tube is calibrated based on the sampling time not related with number
of pump strokes.
2) Sampling time ：0.5-5.0 minutes
3) Detectable limit ：10 ppm(5.0 minutes)
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Temperature compensation ：Necessary(See "TEMPERATURE CORRECTION TABLE)
7) Reading ：Colour intensity method using colour standard chart shown in below
8) Colour change ：Pale yellow→Green to Blue
2. RELATIVE STANDARD DEVIATION
RSD-low： RSD-mid.： RSD-high：
3. CHEMICAL REACTION
Molybdate is reduced and molybdeum blue is produced.
CO＋PdSO4＋(NH4)MoO4→Mo3O8
4. CALIBRATION OF THE TUBE
STANDARD GAS CYLINDER METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
REAGENT
(PaleYellow)
REAGENT
(PaleYellow)
First Section Second Section
106B
CARBON MONOXIDE
Substance Interference ppm Coexistence
Nitrogen dioxide 1 Lower readings are given.
Hydrogen sulphide Black stain is produced. 1,000 Black stain is produced and higher
readings are given.
Hydrogen(over 40℃) Similar stain is produced 10％ Whole reagent is discoloured to
Blue and higher readings are given.
6. NOTE
1)In case of determining CO concentration,it is necessary to take a waiting time related to the sampling time
andambient tenperature.After thewaiting time,compare the second section of reagent with the colour standard
chart.
2)In case of spontaneous conbustion of coal mines,Ethylene and CO are produced.The first section is partially
stained to deep blue from the top of the section according tc Ethylene concentration .Whole areas of first
and second sectionsare equallystained to greenishblue according to CO concentration.The first sectionis
available to detect less 5 ppm of Ethylene.
TEMPERATURE CORRECTION TABLE
Temperature 0℃ 5℃ 10℃ 15℃ 20℃ 25℃ 30℃ 35℃ 40℃
(32°F) (41°F) (50°F) (59°F) (68°F) (77°F) (86°F) (96°F) (104°F)
Waiting time(minute)
Sampling time up to 1 minutes 5 5 3 2 2 1 1 1 1
Sampling time of 2 minutes 7 7 4 3 3 2 1 1 1
Chart Readings(ppm)
100 400 250 150 100 70 50 40 30 20
200 800 500 300 200 140 100 70 50 40
300 1,200 800 450 300 200 150 100 80 60
600 2,300 1,500 900 600 400 300 200 150 120
1,000 3,900 2,500 1,500 1,000 700 500 300 250 200
Color Standards for CARBON MONOXIDE
Concentration
(P.P.M) 0 100 200 300 600 1000
Feeding Time ：30 sec.
Waiting Time ：2 min.
Temperature ：15℃