- GASTEC手動氣體采樣...
- GASTEC氣體檢測管
- GASTEC長時間(時量...
- GASTEC電泵用氣體檢...
- 日本光明(北川式)氣體檢...
- 日本KOMYOKK手動氣...
- 自動氣體采樣器
- 突發性有毒有害氣體檢測箱
- 惡臭氣體快速檢測箱
- 煙道氣體快速檢測箱
- 快速水質檢測管
- 快速水質、地質污染**檢...
- 便攜式氣體報警器
- 恩尼克思?xì)怏w檢測報警器
- 壓縮空氣有害不純物檢測套...
- 標準氣體發生裝置
- 室內空氣質量檢測儀
- 特殊用檢測管
- 國產氣體檢測管及采樣器
- 便攜式氣味傳感器
- 氣體采樣袋
- 配件及耗材
- 氣體傳感器
產品詳情
簡單介紹:
光明理化乙硼烷B2H6氣體檢測管242S
光明理化乙硼烷B2H6氣體檢測管242S ,乙硼烷B2H6氣體檢測管242S DIBORANE 0.02-5ppm,日本光明理化工業株式會社從1947年開始,在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史
詳情介紹:
光明理化乙硼烷B2H6氣體檢測管242S
光明理化乙硼烷B2H6氣體檢測管242S ,乙硼烷B2H6氣體檢測管242S DIBORANE 0.02-5ppm,日本光明理化工業株式會社從1947年開始,在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史 。目前是世界上*大的檢測管生產廠家,也是日本**家通過美國SEI的認證,歐盟的認證的檢測管廠家。公司不僅有ISO9001:2000的認證,還獲得了環境管理的ISO14001的認證。北川式手動氣體采集器AP-20 備有采氣完成指示計 , 可以清楚的判明采氣是否完成 . • 有專門截留玻璃的截留槽 , 以防止檢測管割尖時玻璃片飛濺 . • 有采氣容積為 50 毫升和 100 毫升的兩段式制動卡 . • 采氣器極為小巧 , 并有便于攜帶的皮具包 。
1. PERFORMANCE
1) Measuring range :0.1-5 ppm 0.05-2.5 ppm 0.02-1.0 ppm
Number of pump strokes 1(100ml) 2(200ml) 5(500ml)
2) Sampling time :1 minute/1 pump stroke
3) Detectable limit :0.01 ppm(500ml)
4) Shelf life :2 years
5) Operating temperature :0~40℃
6) Operating Humidity :No corrections are necessary in case of 1 or 2 pump strokes.
In case of 5 pump strokes, the available humidity range is up
to 25mg H2O/r[~30℃(86°F), 80%R.H.].
7) Temperature compensation :Necessary(See "TEMPERATURE CORRECTION TABLE")
8) Reading :Direct reading from the scale calibrated by 1 pump stroke
9) Colour change :Pale yellow→Reddish purple
2. RELATIVE STANDARD DEVIATION
RSD-low:10% RSD-mid.:10% RSD-high:10%
3. CHEMICAL REACTION
By reacting with Mercuric cholride, Hydrogen chloride is liberated and PH indicator is discoloured.
B2H6+HgCI2→HCI
4. CALIBRATION OF THE TUBE
STANDARD GAS CYLINDER METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
5
4
3
2
1
0.5
0.1
100ml
ppm
(White)
DEHUMIDIFIER
Tube No.
242S DIBORANE
93
Substance Interference Coexistence
Arsine FIG.2 Higher readings are given.
Phosphine FIG.1 〃
Hydrogen selenide 〃
Monosilane 〃(Boundery is unclear.)
Disilane 〃( 〃 )
Monogermane Not affected.
(NOTE)
In case of 2 and 5 strokes, the following equation is available for the actual concentration.
2 pump strokes:Actual concentration=Temperature corrected value÷2
5 pump strokes:Actual concentration=Temperature corrected value÷5
0
2
3
4
5
1
Phosphine〔ppm〕?
FIG.1 Influence of Phosphine Tube reading 〔
ppm〕
2 4 6 8 10 0
2
3
4
5
1
Arsine〔ppm〕?
FIG.2 Influence of Arsine
1) Measuring range :0.1-5 ppm 0.05-2.5 ppm 0.02-1.0 ppm
Number of pump strokes 1(100ml) 2(200ml) 5(500ml)
2) Sampling time :1 minute/1 pump stroke
3) Detectable limit :0.01 ppm(500ml)
4) Shelf life :2 years
5) Operating temperature :0~40℃
6) Operating Humidity :No corrections are necessary in case of 1 or 2 pump strokes.
In case of 5 pump strokes, the available humidity range is up
to 25mg H2O/r[~30℃(86°F), 80%R.H.].
7) Temperature compensation :Necessary(See "TEMPERATURE CORRECTION TABLE")
8) Reading :Direct reading from the scale calibrated by 1 pump stroke
9) Colour change :Pale yellow→Reddish purple
2. RELATIVE STANDARD DEVIATION
RSD-low:10% RSD-mid.:10% RSD-high:10%
3. CHEMICAL REACTION
By reacting with Mercuric cholride, Hydrogen chloride is liberated and PH indicator is discoloured.
B2H6+HgCI2→HCI
4. CALIBRATION OF THE TUBE
STANDARD GAS CYLINDER METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
5
4
3
2
1
0.5
0.1
100ml
ppm
(White)
DEHUMIDIFIER
Tube No.
242S DIBORANE
93
Substance Interference Coexistence
Arsine FIG.2 Higher readings are given.
Phosphine FIG.1 〃
Hydrogen selenide 〃
Monosilane 〃(Boundery is unclear.)
Disilane 〃( 〃 )
Monogermane Not affected.
(NOTE)
In case of 2 and 5 strokes, the following equation is available for the actual concentration.
2 pump strokes:Actual concentration=Temperature corrected value÷2
5 pump strokes:Actual concentration=Temperature corrected value÷5
0
2
3
4
5
1
Phosphine〔ppm〕?
FIG.1 Influence of Phosphine Tube reading 〔
ppm〕
2 4 6 8 10 0
2
3
4
5
1
Arsine〔ppm〕?
FIG.2 Influence of Arsine