- GASTEC手動氣體采樣...
- GASTEC氣體檢測管
- GASTEC長時間（時量...
- GASTEC電泵用氣體檢...
- 日本光明（北川式）氣體檢...
- 日本KOMYOKK手動氣...
- 自動氣體采樣器
- 突發性有毒有害氣體檢測箱
- 惡臭氣體快速檢測箱
- 煙道氣體快速檢測箱
- 快速水質檢測管
- 快速水質、地質污染**檢...
- 便攜式氣體報警器
- 恩尼克思?xì)怏w檢測報警器
- 壓縮空氣有害不純物檢測套...
- 標準氣體發生裝置
- 室內空氣質量檢測儀
- 特殊用檢測管
- 國產氣體檢測管及采樣器
- 便攜式氣味傳感器
- 氣體采樣袋
- 配件及耗材
- 氣體傳感器
產品詳情
簡單介紹：
乙炔中磷化氫PH3氣體檢測管121SA
乙炔中磷化氫PH3氣體檢測管121SA，乙炔中磷化氫PH3氣體檢測管121SA PHOSPHINE IN ACETYLENE 20-800ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。
詳情介紹：
乙炔中磷化氫PH3氣體檢測管121SA
乙炔中磷化氫PH3氣體檢測管121SA，乙炔中磷化氫PH3氣體檢測管121SA PHOSPHINE IN ACETYLENE 20-800ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史 。目前是世界上*大的檢測管生產廠家，也是日本**家通過美國SEI的認證，歐盟的認證的檢測管廠家。公司不僅有ISO9001:2000的認證，還獲得了環境管理的ISO14001的認證。北川式手動氣體采集器AP-20 備有采氣完成指示計 , 可以清楚的判明采氣是否完成 . • 有專門截留玻璃的截留槽 , 以防止檢測管割尖時玻璃片飛濺 . • 有采氣容積為 50 毫升和 100 毫升的兩段式制動卡 . • 采氣器極為小巧 , 并有便于攜帶的皮具包 。
Tube No.121SA
1. PERFORMANCE
1) Measuring range ：20-800 ppm
Number of pump strokes 1(100ml)
2) Sampling time ：3 minutes/1 pump stroke with orifice
3) Detectable limit ：5 ppm
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：Pale blue→Reddish purple
2. RELATIVE STANDARD DEVIATION
RSD-low：10％ RSD-mid.：5％ RSD-high：5％
3. CHEMICAL REACTION
By reacting with Mercuric chloride(II)and Cupric sulphate(II), Mercuric phosphorus chloride and Cupric
phosphate are produced respectively.
Moreover, Cupric phosphide reacts with Acetylene and Copper acetylene is produced.
PH3＋HgCI2＋H2O→Hg3P2?3HgCI?3H2O
PH3＋CuSO4→Cu3P2＋H2O
Cu3P2＋HC≡CH→CuC≡CCu
4. CALIBRATION OF THE TUBE
COLOURIMETRY METHOD
5. INTERFERENCE AND CROSS SENSITIVITY 800
700
600
500
400
300
200
100
50
20
ppm
GAS To pump
121SA PHOSPHINE IN ACETYLENE
Substance Interference ppm Coexistence
Hydrogen sulphide Black stain is produced. 10 Higher readings are given.
Arsine Dim yellow stain is produced. 10 〃
Washer
Connector
holder
Rubber tube
connector
Flow Control Orifice
INDICATOR
6.NOTE
1)In case that Acetylene does not exist, lower readings are given.
2)A flow control orifice(an extra option)is required to attach as shown in the following drawing.
1. PERFORMANCE
1) Measuring range ：20-800 ppm
Number of pump strokes 1(100ml)
2) Sampling time ：3 minutes/1 pump stroke with orifice
3) Detectable limit ：5 ppm
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：Pale blue→Reddish purple
2. RELATIVE STANDARD DEVIATION
RSD-low：10％ RSD-mid.：5％ RSD-high：5％
3. CHEMICAL REACTION
By reacting with Mercuric chloride(II)and Cupric sulphate(II), Mercuric phosphorus chloride and Cupric
phosphate are produced respectively.
Moreover, Cupric phosphide reacts with Acetylene and Copper acetylene is produced.
PH3＋HgCI2＋H2O→Hg3P2?3HgCI?3H2O
PH3＋CuSO4→Cu3P2＋H2O
Cu3P2＋HC≡CH→CuC≡CCu
4. CALIBRATION OF THE TUBE
COLOURIMETRY METHOD
5. INTERFERENCE AND CROSS SENSITIVITY 800
700
600
500
400
300
200
100
50
20
ppm
GAS To pump
121SA PHOSPHINE IN ACETYLENE
Substance Interference ppm Coexistence
Hydrogen sulphide Black stain is produced. 10 Higher readings are given.
Arsine Dim yellow stain is produced. 10 〃
Washer
Connector
holder
Rubber tube
connector
Flow Control Orifice
INDICATOR
6.NOTE
1)In case that Acetylene does not exist, lower readings are given.
2)A flow control orifice(an extra option)is required to attach as shown in the following drawing.
The KITAGAWA Gas Detector Tube System is a complete sampling and analysis system for determining hazardous gas and vapour concentrations quickly and easily. The KITAGAWA Gas Detector Tube System is comprised of an Air Sampling Pump and Precision Gas Detector Tubes.
The KITAGAWA air sampling pump reproducibly draws 100cc of sample air through the detector tube. All detector tubes are calibrated for a single pump stroke; there is no need for multiple volumes or stroke counters.
Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stain is created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube.
How To Use The KITAGAWA Gas Detector Tube System
Detector tubes are available to measure more than 200 different kinds of gases and vapours. For many gases and vapours, there are several concentration ranges available giving you the flexibility to measure both low and high concentrations without sacrificing precision.
How To Use The KITAGAWA Gas Detector Tube System
Detector tubes are available to measure more than 200 different kinds of gases and vapours. For many gases and vapours, there are several concentration ranges available giving you the flexibility to measure both low and high concentrations without sacrificing precision.
For specific information, please refer to the list of detector tubes.