- GASTEC手動氣體采樣...
- GASTEC氣體檢測管
- GASTEC長時間（時量...
- GASTEC電泵用氣體檢...
- 日本光明（北川式）氣體檢...
- 日本KOMYOKK手動氣...
- 自動氣體采樣器
- 突發性有毒有害氣體檢測箱
- 惡臭氣體快速檢測箱
- 煙道氣體快速檢測箱
- 快速水質檢測管
- 快速水質、地質污染**檢...
- 便攜式氣體報警器
- 恩尼克思?xì)怏w檢測報警器
- 壓縮空氣有害不純物檢測套...
- 標準氣體發生裝置
- 室內空氣質量檢測儀
- 特殊用檢測管
- 國產氣體檢測管及采樣器
- 便攜式氣味傳感器
- 氣體采樣袋
- 配件及耗材
- 氣體傳感器
產品詳情
簡單介紹：
光氣COCl2氣體檢測管146S
光氣COCl2氣體檢測管146S，光氣COCl2氣體檢測管146S PHOSGENE 0.1-20ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史
詳情介紹：
光氣COCl2氣體檢測管146S
光氣COCl2氣體檢測管146S，光氣COCl2氣體檢測管146S PHOSGENE 0.1-20ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史 。目前是世界上*大的檢測管生產廠家，也是日本**家通過美國SEI的認證，歐盟的認證的檢測管廠家。公司不僅有ISO9001:2000的認證，還獲得了環境管理的ISO14001的認證。北川式手動氣體采集器AP-20 備有采氣完成指示計 , 可以清楚的判明采氣是否完成 . • 有專門截留玻璃的截留槽 , 以防止檢測管割尖時玻璃片飛濺 . • 有采氣容積為 50 毫升和 100 毫升的兩段式制動卡 . • 采氣器極為小巧 , 并有便于攜帶的皮具包 。
Tube No.146S
1. PERFORMANCE
1) Measuring range ：0.5-20 ppm 0.1-0.5 ppm
Number of pump strokes 1(100ml) 5(500ml)
2) Sampling time ：1 minute/1 pump stroke
3) Detectable limit ：0.05 ppm(500ml)
4) Shelf life ：1 year (Necessary to store in a refrigerated place ; 0～10℃)
5) Operating temperature ：0～40℃
6) Temperature compensation ：Necessary(See "TEMPERATURE CORRECTION TABLE")
7) Reading ：Direct reading from the scale calibrated by 1 pump stroke
8) Colour change ：White→Red
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：10％ RSD-high：5％
3. CHEMICAL REACTION
By reacting with Nitro-benzyl pyridine, urea derivative is produced.
This urea derivative reacts with Benzyl aniline and dyestuff is produced.
4. CALIBRATION OF THE TUBE
COLOURIMETRY METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
20.0
15.0
10.0
5.0
3.0
1.0
0.5
ppm
100ml
GAS To pump
DEHUMIDIFIER
(White)
146S PHOSGENE
0
10
5
Nitrogen dioxide〔ppm〕?
FIG.1 Influence of Nitrogen dioxide
Phosgene indicating value 〔ppm〕
10 20 30
Substance Interference ppm Coexistence
Nitrogen dioxide Yellow stain is produced. 100 Yellow stain is produced and higher
FIG.1 readings are given.
Chlorine 5 Discolouration is faded from the gas
inlet edge.
Hydrogen chloride 10 〃
Sulphur dioxide 0.2％ 〃
(NOTE)
When the concentration is below 0.5 ppm, 5 pump strokes can be used to determine the lower concentration.
Following formula is available for the actual concentration.
Actual concentration＝1/5×Temperature corrected value
TEMPERATURE CORRECTION TABLE
Scale True Concentration (ppm)
Readings 0℃ 10℃ 20℃ 30℃ 40℃
(ppm) (32°F) (50°F) (68°F) (86°F) (104°F)
20 13.5 17.0 20.0 21.8 23.0
15 10.5 12.8 15.0 16.5 17.5
10 7.0 8.6 10.0 11.0 11.8
5 3.5 4.3 5.0 5.5 5.8
3 3.0 3.0 3.0 3.0 3.0
1. PERFORMANCE
1) Measuring range ：0.5-20 ppm 0.1-0.5 ppm
Number of pump strokes 1(100ml) 5(500ml)
2) Sampling time ：1 minute/1 pump stroke
3) Detectable limit ：0.05 ppm(500ml)
4) Shelf life ：1 year (Necessary to store in a refrigerated place ; 0～10℃)
5) Operating temperature ：0～40℃
6) Temperature compensation ：Necessary(See "TEMPERATURE CORRECTION TABLE")
7) Reading ：Direct reading from the scale calibrated by 1 pump stroke
8) Colour change ：White→Red
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：10％ RSD-high：5％
3. CHEMICAL REACTION
By reacting with Nitro-benzyl pyridine, urea derivative is produced.
This urea derivative reacts with Benzyl aniline and dyestuff is produced.
4. CALIBRATION OF THE TUBE
COLOURIMETRY METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
20.0
15.0
10.0
5.0
3.0
1.0
0.5
ppm
100ml
GAS To pump
DEHUMIDIFIER
(White)
146S PHOSGENE
0
10
5
Nitrogen dioxide〔ppm〕?
FIG.1 Influence of Nitrogen dioxide
Phosgene indicating value 〔ppm〕
10 20 30
Substance Interference ppm Coexistence
Nitrogen dioxide Yellow stain is produced. 100 Yellow stain is produced and higher
FIG.1 readings are given.
Chlorine 5 Discolouration is faded from the gas
inlet edge.
Hydrogen chloride 10 〃
Sulphur dioxide 0.2％ 〃
(NOTE)
When the concentration is below 0.5 ppm, 5 pump strokes can be used to determine the lower concentration.
Following formula is available for the actual concentration.
Actual concentration＝1/5×Temperature corrected value
TEMPERATURE CORRECTION TABLE
Scale True Concentration (ppm)
Readings 0℃ 10℃ 20℃ 30℃ 40℃
(ppm) (32°F) (50°F) (68°F) (86°F) (104°F)
20 13.5 17.0 20.0 21.8 23.0
15 10.5 12.8 15.0 16.5 17.5
10 7.0 8.6 10.0 11.0 11.8
5 3.5 4.3 5.0 5.5 5.8
3 3.0 3.0 3.0 3.0 3.0